1200W Adax NEO Panel - 934mm (w) x 370mm (h)

The Adax Neo range of convector, electric panel heaters are modern, elegant and slimline. They have a digital display and energy efficient programming that are ideal for a variety installations and roomsets. The panel heaters are available in 7 different heat outputs, 11 different physical sizes and 4 different colours.

Availability: This product is no longer in stock

£142.00 (inc Vat)

Technical Spec

Height (mm)370
Width (mm)934
Outer FinishWhite, Black, Silver or Red
MaterialMild Steel
DesignSlimline Electric Convector/Panel Heater
Fixing KitWall fixings plus full instructions
Output Watts1200
Guarantee5 Years Euronorm BS EN 442
Power Lead Length1.3 Metres
IP RatingIP20
ModelPanel Heater
Technical DrawingProduct PDF


Our range of Adax NEO electric convector panel heaters are contemporary, elegant and slim line and make a feature to any roomset. The Adax NEO stylng was rewarded winning a prestigious award in Design excellence in Industrial Design. 
The product has been designed and manufactured with functionality and the environment in mind. The convection heat design provides super efficient heat up times, quickly transfering your room from cold to warm.  
The heaters have a built in automatic day & night temperature reduction which saves 25% energy on running costs. (Running costs are greatly reduced due to the functionality of the Adax NEO with "cutback" & "comfort" modes reducing energy consumption at different user programmed periods of the day or night)
The temperature range is 6 to 30 degrees with a safety cut out feature and a maximum surface temperature of 75 degrees.
The Adax NEO electric panel heater has a clear LED display showing an accurate current running temperature. A red LED display when illuminated shows the element is working. The temperature of the room is measured every minute so the Adax NEO heater can immediately provide more or less heat depending on the programmed desired temperature. 
The Adax NEO’s are easy to install with detachable brackets and full instructions and mounting templates. The panel heaters can be hard wired into a fused spur or simply pluged into a wall socket. The NEO's are fitted with a 3 pin plug supplied on the end of the 1m length white cable which is situated on the rear, right hand side of the unit.
**NWT are a reputable UK distributor of Adax products**
Please Note the range of Adax NEO  convector panel heaters must be mounted horizontally and not vertically.
The Neo’s are IP20 rated and are covered by a 5 year product guarantee.  
The Neo’s are available in 7 different heat outputs, 11 different physical sizes and 6 different colours. (See below) 


NP Panel Models (All Colours):

400w – 474mm (w) x 370mm (h)
600w – 589mm (w) x 370mm (h)
800w – 704mm (w) x 370mm (h)
1000w – 762mm (w) x 370mm (h)
1200w – 934mm (w) x 370mm (h)
1400w – 1049mm (w) x 370mm (h)
2000w – 1394mm (w) x 370mm (h)
NL Skirting Models (All Colours):
600w – 870mm (w) x 200mm (h)
800w – 1050mm (w) x 200mm (h)
1000w – 1280mm (w) x 200mm (h)
1200w – 1450mm (w) x 200mm (h)
 We also have NEW for 2014! The following models available in blue and pink. An ideal heating solution for a childs bedroom or playroom.
NP Panel Models (Pink & Blue):
800w Pink - 704mm (w) x 370mm (h)
800w Blue - 704mm (w) x 370mm (h)
NL Skirting Models (Pink & Blue):
600w Pink - 870mm (w) x 200mm (h)
600w Blue - 870mm (w) x 200mm (h)
If you wish to have the heater free standing and not wall mounted we also supply the feet (pair) in 2 sizes:
Adax Feet (Pair) - 370mm high Adax Neo Models
Adax Feet (Pair) - 200mm high Adax Neo Models  
These are simply fixed to the back of the panel heater with screws provided. 

Products in the same range

    10 other products in this category: