500mm (w) x 1800mm (h) "Pandora" Electric Chrome Designer Towel Rail (Single Heat or Thermostatic Option)

The 500mm(w) x 1800mm(h) Pandora towel rail will give your contemporary bathroom a designer look, with understated chic and sophistication. This delightful curved model is enhanced by a stunning, polished chrome finish, for a high-end look and long-lasting durability. The Pandora towel rail can be installed on a central heating system, fitted as a stand alone electric unit or as dual fuel towel rail for maximum efficiency.

Availability: In Stock

£309.00 (inc Vat)

2 - 3 Working Days

Technical Spec

Height (mm)1800
Width (mm)500
Outer FinishSparkling Chrome Plating
MaterialMild Steel
Tube Diameter (mm)30 x 10
Tube Bar Pattern4 - 5 - 6 - 7 - 9
Fixing KitFour point chrome plated wall fixings
AccessoriesBleed Valves & Blank Plugs
Output Watts600
Maximum Operating Pressure6 Bar
Guarantee10 Years Euronorm BS EN 442
Projection85-100mm
Pipe Centres460mm
Pipe connection (mm)15mm (NOTE: Valves not Included)
Volts230VAC
BrandNWT Direct
Technical DrawingProduct PDF

Description

Why Buy This Electric Chrome Designer Towel Rail?

"The 500mm(w) x 1800mm(h) Pandora towel rail will give your contemporary bathroom a designer look, with understated chic and sophistication. This delightful curved model is enhanced by a stunning, polished chrome finish, for a high-end look and long-lasting durability."

Choosing your Electric Heating Element:

- This Chrome Electric Towel Rail can be purchased with 2 different suitable Electric Heating Elements depending on your requirements. 

1. Single Heat (Fixed Operating Temperature 70°c) Electric Element.

2. Thermostatic (Manually Controlled Operating Temperature 5 - 70°c) Electric Element.

We recommend choosing a thermostatic option when installing larger towel rails or where children may be present. 

Is this Electric Towel Rail Pre-Filled?

YES! The towel rail will arrived pre-filled with a pre-mixed solution designed specifically for heated towel rails. This protects against rust & corrosion and will assist in efficient heat transfer. Your chosen electric heating element will be supplied separately along with the towel rail so you can choose whether to install this on the left or right hand side. NOTE: The element must always be installed vertically and we recommend all installation work is carried out by a qualified professional.

Product Description:

- Our range of chrome designer towel rails are designed in house and manufactured at our modern factory.

- The high heat output of our towel rails are achieved from the sourcing of high quality steel finished with over 50 microns of chrome.

- All our heat output figures for our electric towel rail range are listed from the wattage of the supplied element. eg 300W Element x3.41 = 1023 BTUs

- We have designed the individual bar patterns of each towel rail to optimise the surface area for heat output while integrating spaces for functionality to allow you to hang your towels.

- All our towel rails are supplied with a wall mounting kit (including bleed valve and blank plugs)

- This towel rail is supplied with our 10 year manufacturer guarantee. The electric heating element has a 1 year guarantee. (Euronorm BS EN 442). 

NOTE: Please do not compare this chrome towel rail with cheap imports, which will be aesthetically less appealing, have a poor quality chrome finish and a reduced heat outputs.

Products in the same range

30 other products in this category: